| Reptile Basics Inc Congratulations on your purchase of the RBI Radiant Heat Panel. Your new heat panel is constructed of a durable and attractive ABS plastic. Unlike other panels, the RBI panel is designed from the outset to be used in reptile cage applications and is highly moisture/water resistant. While you can not submerge the panel in water it will easily withstand normal spraying or misting of the cage and also withstand very high humidity levels. The internal element is UL listed and is designed to operate for 40+ years under normal conditions. Please read all of the instructions thoroughly before proceeding! Mounting:
DO NOT mount panel so that lens is less than 6” from a cage surface! Mounting is accomplished with the two stainless steel screws included with your panel. The screws are intended for use with a cage material 3/8” or thicker. If you are mounting the panel in a cage constructed of ¼” material we suggest using two machine screws/nuts of appropriate length available at any hardware store. Position the panel in the desired location in the cage. We recommend that the cord be oriented towards the rear or side of the cage so that misting or spraying of the cage can not be directed towards the cord hole in the panel. You may also want to position the cord side of the panel close to the cage side or back so that your reptile will not be able to climb on the cord and rodents will not have access to it. The white lens should be pointed down, into the cage. Insert the mounting screws through the mounting holes in the panel and tighten them so they are snug, but not tight. Mounting is accomplished much more easily if you can turn the cage upside down but it is not necessary. You will need to drill a ¼” hole for the cord to pass through. Pull the cord through until there is no slack still in the cage. Attach the plug following the instructions on the plug packaging. Use: You will need a thermostat to properly use your newly installed panel. Without a thermostat heat buildup in the cage may be fatal to your reptiles. We use and recommend the Helix DBS-1000 proportional thermostat for the best product life and for the most accurate temperature control. If the panel is being used in a cage with large amounts of water, or outdoors, we recommend the panel is plugged into a GFCI outlet for maximum safety! Cleaning Precautions: Warranty:
|